.\" Copyright 2003,2004 Andi Kleen, SuSE Labs.
.\" and Copyright 2007 Lee Schermerhorn, Hewlett Packard
.\"
.\" %%%LICENSE_START(VERBATIM_PROF)
.\" Permission is granted to make and distribute verbatim copies of this
.\" manual provided the copyright notice and this permission notice are
.\" preserved on all copies.
.\"
.\" Permission is granted to copy and distribute modified versions of this
.\" manual under the conditions for verbatim copying, provided that the
.\" entire resulting derived work is distributed under the terms of a
.\" permission notice identical to this one.
.\"
.\" Since the Linux kernel and libraries are constantly changing, this
.\" manual page may be incorrect or out-of-date.  The author(s) assume no
.\" responsibility for errors or omissions, or for damages resulting from
.\" the use of the information contained herein.
.\"
.\" Formatted or processed versions of this manual, if unaccompanied by
.\" the source, must acknowledge the copyright and authors of this work.
.\" %%%LICENSE_END
.\"
.\" 2006-02-03, mtk, substantial wording changes and other improvements
.\" 2007-08-27, Lee Schermerhorn <Lee.Schermerhorn@hp.com>
.\"     more precise specification of behavior.
.\"
.TH GET_MEMPOLICY 2 2008-08-15 Linux "Linux Programmer's Manual"
.SH NAME
get_mempolicy \- retrieve NUMA memory policy for a process
.SH SYNOPSIS
.B "#include <numaif.h>"
.nf
.sp
.BI "int get_mempolicy(int *" mode ", unsigned long *" nodemask ,
.BI "                  unsigned long " maxnode ", unsigned long " addr ,
.BI "                  unsigned long " flags );
.sp
Link with \fI\-lnuma\fP.
.fi
.SH DESCRIPTION
.BR get_mempolicy ()
retrieves the NUMA policy of the calling process or of a memory address,
depending on the setting of
.IR flags .

A NUMA machine has different
memory controllers with different distances to specific CPUs.
The memory policy defines from which node memory is allocated for
the process.

If
.I flags
is specified as 0,
then information about the calling process's default policy
(as set by
.BR set_mempolicy (2))
is returned.
The policy returned
.RI [ mode
and
.IR nodemask ]
may be used to restore the process's policy to its state at
the time of the call to
.BR get_mempolicy ()
using
.BR set_mempolicy (2).

If
.I flags
specifies
.BR MPOL_F_MEMS_ALLOWED
(available since Linux 2.6.24), the
.I mode
argument is ignored and the set of nodes [memories] that the
process is allowed to specify in subsequent calls to
.BR mbind (2)
or
.BR set_mempolicy (2)
[in the absence of any
.IR "mode flags" ]
is returned in
.IR nodemask .
It is not permitted to combine
.B MPOL_F_MEMS_ALLOWED
with either
.B MPOL_F_ADDR
or
.BR MPOL_F_NODE .

If
.I flags
specifies
.BR MPOL_F_ADDR ,
then information is returned about the policy governing the memory
address given in
.IR addr .
This policy may be different from the process's default policy if
.BR mbind (2)
or one of the helper functions described in
.BR numa (3)
has been used to establish a policy for the memory range containing
.IR addr .

If the
.I mode
argument is not NULL, then
.BR get_mempolicy ()
will store the policy mode and any optional
.I "mode flags"
of the requested NUMA policy in the location pointed to by this argument.
If
.I nodemask
is not NULL, then the nodemask associated with the policy will be stored
in the location pointed to by this argument.
.I maxnode
specifies the number of node IDs
that can be stored into
.IR nodemask \(emthat
is, the maximum node ID plus one.
The value specified by
.I maxnode
is always rounded to a multiple of
.IR "sizeof(unsigned long)" .

If
.I flags
specifies both
.B MPOL_F_NODE
and
.BR MPOL_F_ADDR ,
.BR get_mempolicy ()
will return the node ID of the node on which the address
.I addr
is allocated into the location pointed to by
.IR mode .
If no page has yet been allocated for the specified address,
.BR get_mempolicy ()
will allocate a page as if the process had performed a read
[load] access to that address, and return the ID of the node
where that page was allocated.

If
.I flags
specifies
.BR MPOL_F_NODE ,
but not
.BR MPOL_F_ADDR ,
and the process's current policy is
.BR MPOL_INTERLEAVE ,
then
.BR get_mempolicy ()
will return in the location pointed to by a non-NULL
.I mode
argument,
the node ID of the next node that will be used for
interleaving of internal kernel pages allocated on behalf of the process.
.\" Note:  code returns next interleave node via 'mode' argument -Lee Schermerhorn
These allocations include pages for memory mapped files in
process memory ranges mapped using the
.BR mmap (2)
call with the
.B MAP_PRIVATE
flag for read accesses, and in memory ranges mapped with the
.B MAP_SHARED
flag for all accesses.

Other flag values are reserved.

For an overview of the possible policies see
.BR set_mempolicy (2).
.SH RETURN VALUE
On success,
.BR get_mempolicy ()
returns 0;
on error, \-1 is returned and
.I errno
is set to indicate the error.
.SH ERRORS
.TP
.B EFAULT
Part of all of the memory range specified by
.I nodemask
and
.I maxnode
points outside your accessible address space.
.TP
.B EINVAL
The value specified by
.I maxnode
is less than the number of node IDs supported by the system.
Or
.I flags
specified values other than
.B MPOL_F_NODE
or
.BR MPOL_F_ADDR ;
or
.I flags
specified
.B MPOL_F_ADDR
and
.I addr
is NULL,
or
.I flags
did not specify
.B MPOL_F_ADDR
and
.I addr
is not NULL.
Or,
.I flags
specified
.B MPOL_F_NODE
but not
.B MPOL_F_ADDR
and the current process policy is not
.BR MPOL_INTERLEAVE .
Or,
.I flags
specified
.B MPOL_F_MEMS_ALLOWED
with either
.B MPOL_F_ADDR
or
.BR MPOL_F_NODE .
(And there are other
.B EINVAL
cases.)
.SH VERSIONS
The
.BR get_mempolicy ()
system call was added to the Linux kernel in version 2.6.7.
.SH CONFORMING TO
This system call is Linux-specific.
.SH NOTES
For information on library support, see
.BR numa (7).
.SH SEE ALSO
.BR getcpu (2),
.BR mbind (2),
.BR mmap (2),
.BR set_mempolicy (2),
.BR numa (3),
.BR numa (7),
.BR numactl (8)
.SH COLOPHON
This page is part of release 3.53 of the Linux
.I man-pages
project.
A description of the project,
and information about reporting bugs,
can be found at
\%http://www.kernel.org/doc/man\-pages/.
